Your cart is currently empty!

NICE RUN 2500I Sliding Gate Motor in UAE
د.إ3,200
Available Options Professional Installation with 1 Year Warranty Professional Installation with 1 Year Warranty (+800 AED)
Description
NICE RUN 2500I Sliding Gate Opener Motor in Dubai UAE
NICE RUN 2500I Sliding Gate Opener:
- Ventilated motor with built-in inverter.
- Electromechanical gear motor with NICE Blue BUS technology.
- Compatible for operation with Solemyo and Opera systems.
- Simple to install: the Blue BUS system enables connections by means
- of just two wires between the control unit and up to 15 control safety and signalling devices.
- Safe: the acceleration settings (at the start of the manoeuvre)
- and the deceleration settings (at the end of the manoeuvre) are precise and reliable.
- The temperature sensor: Run is able to manage force,
- adapting it to the different climatic and environmental conditions,
- while adapting the thermal cut-out protection
- and intensity of self-ventilation, depending on the temperature reading.
- A master/slave selection also automatically synchronises 2 motors,
- enabling the automation of sliding gates with two opposing leaf’s. (built-in inverter)
- Practical and functional: built-in inverter,
- housed inside Run,
- can be simply connected by means of the practical connector guide.
- Very quiet: gear motor on bearings.
- Perfect movement: the inverter enables the power supply and drive
- of the 3-phase motor with single-phase current at 230 Vac,
- acting on the frequency to adjust speed of the automation
- from a minimum of 8.2 m/min to maximum 15.4 m/min.
- In the automation deceleration phase
- the inverter which dialogues with the control unit, increases the torque,
- thus improving performance and reducing
- the risk of the automation blocking on impact with obstacles.
NICE Remote Control:
- Frequency: 433.92 MHz
- Number of channels: 2
- Operating distance: 150/200 m with connected antenna in open spaces
- Dimensions: 58 x 86 x 22 mm.
NICE RUN 2500 Kg Included:
- 1 x NICE RUN 2500I Motor with electromechanical limit switch
- 1 x Rua2 Integrated control unit.
- 2 x ON2E Remotes.
- 1 x EPMB Pair of Blue bus Photocells.
- 1 x OXI Receiver.
- 1 x Blinker Light.
- 1 x Push button.
Reviews
There are no reviews yet.